Update 2017-3-27  by Amanda

If you want to buy from us, please contact (amanda@chitu3d.com)

Received the payment by paypal (dolphinxxf@gmail.com)

If you need technology support, please contact (support@chitu3d.com)

Firmware is Free

 

The Exe Download address

http://www.cbd-3d.com/forum/viewtopic.php?f=10&t=66

  1. Creat a whole new start-up logo

If you only need one language, creat two picturers; 2 languages, creat 4 pictures.

1st: The Start-up page or the Main page,

2nd: The systems infomation page.

The resolution of a picture could be created into 5 sizes below based on your screen size.

  • 2.8 inch screen (320 x 280)
  • 3.5 inch screen (480 x 320)
  • 4.3 inch screen (480 x 272)
  • 5 inch screen (480 x 272)
  • others

Operate the program ‘ .exe’

  1. Select the 2nd tab page, upload the page into the dialog box.
  2. Click the command ‘ generate the logo’ button
  3. Click ‘ yes’ button
  4. Then you will find a logo_320 x 280.logo file generated, put the file into SD card, plug into the board
  5. Click the ‘ print’ button and find that file to print
  6. Re start the device and you will find a new start-up page

2. Based on the chitu UI, only to change the words on screen

The steps as below

  1. Select the 1st tab page
  2. Choose the left button below, Click
  3. Select the file uniform interface file, such as ‘3.5inch uniform interface UI.bin’
  4. Upload the file
  5. Then it will generate 4 files into that document, the bmp format
  6. Use the photoshop cs5 software to add the logo of your company or whatever
  7. Then select each file into the right part of the 1st tab page
  8. Click the button ‘ generate the new UI page’
  9. ‘Confirm’
  10. Then you will find a logo_320 x 280.logo file generated, put the file into SD card, plug into the board
  11. Click the ‘ print’ button and find that file to print
  12. Re start the device and you will find a new start-up page

 

adminSolutionsStart-up Logo
Update 2017-3-27  by Amanda If you want to buy from us, please contact (amanda@chitu3d.com) Received the payment by paypal (dolphinxxf@gmail.com) If you need technology support, please contact (support@chitu3d.com) Firmware is Free   The Exe Download address http://www.cbd-3d.com/forum/viewtopic.php?f=10&t=66 Creat a whole new start-up logo If you only need one language, creat two picturers; 2 languages, creat 4 pictures. 1st: The Start-up...